Support

Luxor ZD/ZDC

1. To use this function, first get the IP address from the controller. On the controller, select setup, then Wi-Fi. 
2. Make sure the status on the top line is “Connected,” and then note the IP address.
3. Now enter this IP address into the app. Go into the app, press the Controllers icon, and then press the “+” button. The manual configure screen should be shown. 
4. Type in the IP address shown on the controller, and type 80 for the port number. 
5. Repeat the process if you have multiple controllers.

When you start the app, it will send commands to these controllers in addition to those it finds automatically.