Luxor ZD/ZDC

Luxor – Installing the LAN Module


Read Article

A direct connection between the controller and the network equipment can provide a more reliable connection. When planning for a CAT 5, 5e, or 6 connection between the router and a Luxor, your maximum distance is 300 feet. If a longer distance is required, the use of a repeater is necessary. This is standard protocol for Cat cables, and has nothing to do with the hardware or setup of the Luxor. Before beginning the installation of the hardware and module, click here to download the latest firmware.

The Luxor LAN Module is a direct add-on accessory for all Luxor ZD systems that adds support for the following features:

  • iOS & Android Device Control
  • LAM & Light Assignment
  • Linking of Multiple Luxor ZD systems

Step 1

Press bezel lever to the left.

Step 2

Pull bezel outward while holding the lever inward.

Step 3

Disconnect communication Press facepack through cable. Push tab outward.

Step 4

Press facepack through cable. Push tab outward. the bezel while holding the tab outward.

Step 5

Remove cover.

Step 6

Insert LAN module.

Step 7

Connect Cat 5/5e/6 cable to LAN Module.

Step 8

Reconnect communication cable. Close bezel, ensure it locks into place.

Rate this Article: 
No votes yet

Was this article helpful? Yes | No