Wall Lights

SF - Install Note


Read Article

Step 1

Use a MOUNTING BRACKET as a guideline for drilling holes. Level as needed.

Step 2

Screw BRACKET to wall. Drill ½" (1,2 cm) hole, indicated on the bracket.

Step 3

Use VOLTMETER to ensure 11 to 15 V at the fixture.

Step 4

Connect wiring with a waterproof CONNECTOR.

Step 5

Fasten FIXTURE onto the mounting bracket.

Step 6

Tighten SETSCREW with 2 mm Allen key.

Rate this Article: 
No votes yet

Was this article helpful? Yes | No