Support
In-Grade Lights

Tabs

Read Article

The FC & KT are compact in-ground solutions for locations inground, especially in concrete, deck, or patio applications.

The Drive-Over rating can be referenced in the chart below.

Fixture	Drive-Over Rating
FC-GW	1,125 lbs
KT	4,400 lbs

FC Drill Guide

INSTALLATION STEPS

FAQ, Installation

Step 1

Change beam angle LENS and color FILTER by removing and replacing existing components (optional).

Step 2

Dig a hole and insert the construction SLEEVE. Use drainage material below the sleeve. Fill soil or concrete on top of sleeve cover (if applicable).

Step 3

Use a VOLTMETER to ensure 11-15 VAC at the fixture.

Step 4

Connect wiring with a WATERPROOF CONNECTOR. Learn more

Step 5

Install tamper-resistant SCREWS (optional).

Step 6

Replace FACEPLATE and SCREWS.

FC Drill Guide

Resources

English

FC Core Drill Guide

Rate this Article:

Average: 3 (1 vote)

SupportIn-Grade Lights

FC & KT - Install Guide