Filter

Support
In-Grade Lights

Changing the Lamp on the CF Well Light

Tabs

Read Article
CF
  • FAQ, Installation

Step 1

It's always a good idea to change lamps and lamp holder with power to the transformer turned off completely. Remove the grid cover by pushing in the two release pins on the side of the fixture.

Step 2

Remove the grid cover from the lamp housing.

Step 3

The lamp holder is held in place by two rubber O-rings on each side of housing. Pull lamp housing straight up out of base. 

Step 4

Unscrew the bezel from the lamp base.

Step 5

To replace the lamp remove the two screws holding it in place.

Find an authorized FX distributor near you using our interactive Distributor Lookup.

Rate this Article: 
5
Average: 5 (1 vote)

Was this article helpful? Yes | No