Filter

Support
Down Lights

VE, LE, VL, LS - Install Notes

Tabs

Read Article
VE, LE, VL, LS
  • FAQ, Installation

Step 1

Change color FILTER and beam angle LENS by removing and replacing existing components if desired (Designer Series only). Use 5/64" Allen key.

Step 2

Thread CABLE through the fixture loop and around the desired mounting surface. Insert both cable ends into the lock.

Step 3

Run wire down the structure and secure with CABLE TIES.

Step 4

Use a VOLTMETER to ensure 11 to 15 VAC at the fixture.

Step 5

Connect wiring with a WATERPROOF CONNECTOR in a dry area. Learn more

Rate this Article: 
0
No votes yet

Was this article helpful? Yes | No