Filter

LX - Setting Program Off Time

Tabs

Read Article

After choosing a Program letter and setting its On Time(s) the Off times must be set for the same program selected by pressing the Mode selector button to initiate the setting mode.

  • Programming

Step 1

Press the Orange Mode Selector three times to advance to the OFF TIME mode. The Program letter will be flashing. Selecting the Program (A-F) using the UP or DOWN grey arrow and initiate by pressing the round GREY BUTTON button.

Step 2

The OFF TIME will be flashing (maybe flashing NONE). Select the OFF TIME hour using the UP or DOWN grey arrow. Select hour and initiate by pressing the round GREY BUTTON button.  For a dawn start time setting, move hour selection using the UP or DOWN grey arrow between 5:00 pm and 6:00 pm. The display will show indicating a dawn start time with a sun up icon.

Step 3

 After the GREY BUTTON button is pushed, the OFF TIME minutes will be flashing. Select the minutes using the UP or DOWN grey arrows and initiate by pressing the round GREY BUTTON button. If you have selected a dawn OFF TIME, you will not see minutes flashing.

Step 4

The days of week ("Mo") will be flashing. Select the days of the week that the program should run by pressing the UP arrow button to select day or pressing the DOWN arrow button to remove day from the program. By default the programs are set to activate every day.

Rate this Article: 
0
No votes yet

Was this article helpful? Yes | No