Accessories Support

Safety Information


Read Article

Please read and keep all safety and use instructions. If you have questions, contact your local distributor or visit the online support section.

WARNING – To reduce the risk of FIRE OR INJURY TO PERSON:

  • Turn off/unplug and allow to cool before replacing lamp.

  • Lamp gets HOT quickly. Contact only switch/plug when turning on.

  • Do not touch hot lens, guard, or enclosure.

  • Keep lamp away from materials that may burn.

  • Do not touch the lamp at any time. Use a soft cloth. Oil from skin may damage lamp.

  • Do not operate the luminaire fitting with a missing or damaged shield.

WARNING – Risk of Electric Shock

  • Install all luminaires 10 feet (3.0 m) or more from a pool, spa, or fountain.

  • A luminaire shall not use tungsten halogen lamps unless the luminaire is marked for such lamps.

  • Supply connection and electrical components are located above ground level, except for secondary cord that is suitable for wet locations.


  • Be protected by routing in close proximity to the luminaire or fitting, or next to a building structure such as a house or deck.

  • Not be buried except for a maximum 6 inches (25 mm) in order to connect to the main low voltage cable.

  • Have the length cut off so that it is connected to a connector within 6 inches (25 mm) from a building structure, a luminaire, or fitting.

Rate this Article: 
No votes yet

Was this article helpful? Yes | No