TabsRead ArticleSRP, SRP RGBW The SRP-RGBW FAQ page provides quick answers to common questions about installation, setup, and operation. Designed for hardscape, wall, and step lighting applications, this fixture delivers durable performance with full RGBW color control. MAX RUN LENGTH? The maximum run length is 20’ per SRP-CC. MAX RUN LENGTH (CC to SRP-RGBW)? Using the extension cables (SRP-RGBW-EXT), the SRP-RGBW can be installed up to 100’ away from the SRP-CC. CAN I EXTEND THE SRP-RGBW STRIP LIGHT? Yes, we offer the SRP-RGBW-EXT kit. This includes two 5’ power feed extensions, allowing customers to extend the distance between the SRP-CC and SRP-RGBW strip light. WHAT IS THE MAXIMUM NUMBER OF FEET OF SRP-RGBW STRIP LIGHTS RECOMMENDED ON A SINGLE 12-2 WIRE RUN? If the SRP-CC is receiving 12V, then you are OK. The low-voltage wire is only being used for the SRP-CC installation, not the actual strip light. The SRP-CC converts it to DC voltage and powers the strip light. WHAT IS THE POWER CONSUMPTION OF SRP-RGBW? 2.9VA/ft. Learn More ARE THERE SPLICING OPTIONS FOR SRP-RGBW FIXTURES? There are five 24 AWG wires inside of the SRP-RGBW. A bad slice would cause the strip to fail and/or not work. Wire nuts are not to be used. Use only the included connectors and wire lengths. CAN I BURY THE SRP-CC CONTROLLER? It is not recommended to bury the controller but the unit's solid construction and fully waterproof exterior ensure it can handle the harsh environment of any irrigation valve box. CAN YOU FLEX OR BEND THE SRP-RGBW FIXTURE? Do not flex or twist the SRP in any direction. When installing longer runs at higher elevations, avoid leaving the SRP hanging in the channel or mounted for extended periods, as this can cause stress on the LED board and lead to premature failure. If a change in flex direction or angle is needed, it is recommended to use the jumper accessory. Rate this Article: 0 No votes yet
