Filter

Support
Luxor App

Luxor - Manual Configuration (Enter IP Address)

Tabs

Read Article
Luxor
  • FAQ, Installation, Programming
Manual Configure
  1. To use this function, first get the IP address from the controller. On the controller, select setup, then Wi-Fi. 
  2. Make sure the status on the top line is “Connected,” and then note the IP address.
  3. Now, enter this IP address into the app. Go into the app, press the Controllers icon, and then press the “+” button. The manual configure screen should be shown. 
  4. Type in the IP address shown on the controller, and type 80 for the port number. 
  5. Repeat the process if you have multiple controllers.

When you start the app, it will send commands to these controllers in addition to those it finds automatically.

NOTE: Disable Cloud Access to use the Manual IP Configuration mode.

Auto Configure
  1. From the HOME screen, navigate to the SETUP screen using the scroll wheel.
  2. Scroll to and select Wi-Fi.
  3. Scroll to Network field and press scroll wheel to choose a specific network.
  4. Choose NETWORK.
  5. Scroll to the SETTINGS tab on your smartphone.
  6. Select the same NETWORK as you see in the controller.

 

Rate this Article: 
0
No votes yet

Was this article helpful? Yes | No