Filter

Support
Luxor App

Luxor Cloud - Adding a Controller

Tabs

Read Article
  • FAQ, Installation, Programming
STEP 1
On the LUXOR controller, use the scroll wheel and select SETUP.
Next, select WIFI or LAN. 
NOTE:  The SERIAL # from the WI-FI/LAN SETUP screen.
STEP 2

Enter your Luxor controller SERIAL #. Then press NEXT.

STEP 3

A VERIFICATION CODE will display automatically once the SERIAL # is entered in the Luxor Cloud app. The four-digit code will displayed on controller.

STEP 4

Enter the four-digit code. Then press NEXT.

STEP 5

Verify the controller has been added to the Luxor Cloud. The app will display CONNECTED from the CONTROLLERS screen. Press BACK to return to the HOME screen.  For information on managing multiple controllers, please visit support section here.

Rate this Article: 
0
No votes yet

Was this article helpful? Yes | No