| General
Notes: |
- To
test photocell/timer transformer, You must put included
black cap or black electrician's tape over the photocell
before the manual override will work.
- Install
PhotoCell models in areas that receive daylight exposure.
|
| Timer
Setting and Operation: |
- To
set timer for additional ON time move red pin to later
in the night.
- You
can set two on and two off times. This is useful for
owner who want the lights to go off at midnight then
go back on and off again early in the morning.
- Timer
pins represent 30 minute intervals - it is impossible
to perfectly sync multiple transformers with separate
timers and/or photocells. Use one central control if
perfect sync is desired.
|
| Photocell
Settings and Operation: |
- Set
timer to go on around 2:00 pm. - the PhotoCell will
immediately shut off the transformer. At dusk the PhotoCell
will then have power to it to turn the transformer ON.
Set the tripper pins on the time to the desired OFF
time. To test PhotoCell/Timer transformer YOU MUST PUT
BLACK CAP OR TAPE OVER THE PHOTOCELL BEFORE MANUAL OVERRIDE
WILL WORK.
|
